What it is
Tap IP 2 is the control surface for a Logitech meeting room. People walk in, the display wakes, and one tap starts the scheduled meeting. It also handles content sharing, mute and camera on/off. It pairs with a video bar such as the Rally Bar 2, and you pick the meeting platform (see our platform guide).
Key capabilities
- Display: 10.1-inch IPS anti-glare panel, 1920 x 1200, 380 nits, 10-point capacitive touch, oleophobic coating.
- Auto-wake: motion sensors (PIR and radar), plus an accelerometer and ambient light sensor.
- One cable: a single category cable carries power and data, with strain relief and cable retention built into the enclosure.
- Platforms: Microsoft Teams Rooms on Android, Zoom Rooms and Google Meet Rooms.
- Mounting: table, riser and wall mounts (sold separately); 100 x 100 mm VESA FDMI; Kensington lock slot. Works with existing Tap and Tap IP mounts.
- Management: configure and monitor with Logitech Sync.
Specifications
| Item | Detail |
|---|---|
| Dimensions | 246.2 mm W × 56.1 mm H × 171.3 mm D (9.69 × 2.21 × 6.74 in) |
| Weight | 1 kg (2.2 lb) |
| Screen | 10.1 in IPS, 1920 × 1200, 380 nits, 1500:1 contrast |
| Operating system | Logitech CollabOS |
| Network | Ethernet 10/100; Wi-Fi 802.11a/b/g/n/ac/ax; Bluetooth 5.0 |
| Power | PoE, IEEE 802.3af Type 1, Class 3. Needs a PoE network or PoE injector and an Ethernet cable (not included) |
| Operating temperature | 0–40 °C |
| Warranty | Two-year limited hardware warranty; extended warranties available at purchase |
Specifications come from the manufacturer's July 2026 datasheet and can change. Check Logitech's compatibility page before ordering.
Part numbers (global)
| Color | Part number |
|---|---|
| Graphite | 952-000289 |
| Off-white | 952-000292 |
Planning notes
The controller needs a PoE-enabled network port at the table or wall location, or a PoE injector. We confirm cable paths and switch capacity during the walkthrough, and choose the mount that suits the table. See our scoping guide for what else shapes a room project.
Frequently asked questions
Does Logitech Tap IP 2 need a separate power supply?
No. It is powered over Ethernet (PoE, IEEE 802.3af). You need a PoE-enabled switch port or a PoE injector, plus an Ethernet cable.
Which platforms does Tap IP 2 support?
Logitech lists Microsoft Teams Rooms on Android, Zoom Rooms and Google Meet. Check Logitech's compatibility page for the current certified combinations.
Can I reuse my existing Tap mounts?
Logitech says Tap IP 2 works with existing Tap and Tap IP mounts, so you can keep them in place when upgrading.
Does AV8 install Tap IP 2?
Yes. We install, configure and support Logitech rooms in San Francisco and across the Bay Area.
Logitech, Tap and the Logitech logo are trademarks of Logitech. AV8 Technologies is an independent integrator. Datasheet co-branded with AV8 under Logitech's partner program.